WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of multi-color smd led in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium multi-color smd led, welcome to get pricelist from our factory.
Compact Multi-Chip Design
Die-attach and wire-bonding hold chip position on the lead frame to tight tolerances - placement shift changes the beam angle of one color relative to the others.
Pin configuration (common-anode / common-cathode / independent) must match the customer's constant-current driver IC and PCB trace layout before tooling starts.
Lead frame material and internal routing determine whether brightness and color point hold over years of use, or drift after a few thousand hours.
Lens shape and phosphor coating ratio set the viewing angle (70°–140° depending on series) and color-mixing uniformity.

Stable Color Mixing Performance
- Chip binning: chips from the same production lot are sorted by wavelength, luminous intensity, and color temperature before assembly.
- VF matching: chips in a multi-color package must share consistent forward voltage at the same drive current, or the color ratio - and white point - shifts.
- Aging test + CIE (x, y) re-verification before shipment confirms color drift stays within tolerance batch to batch.
- Encapsulant anti-yellowing performance: silicone/epoxy that yellows under heat or extended operation skews color output, especially at high duty cycles.
Technical Specifications
|
Parameter |
WCN-144HR4-70N-086T (Red/Red) |
WCN-144GY2-70N-086T (Yellow/Yellow-Green) |
Notes |
|
Chip Material |
AlGaInP (both channels) |
AlGaInP (Yellow) / GaP (Yellow-Green) |
- |
|
Lens |
Diffused lens with tint |
Diffused lens |
Viewing angle 70° (2θ1/2) for both |
|
Forward Voltage (VF) @ IF=20mA |
1.8–2.3V |
1.8–2.5V |
Measurement tolerance ±0.1V |
|
Luminous Intensity (IV) @ IF=20mA |
15–60mcd |
7–30mcd |
Measurement tolerance ±10% |
|
Dominant Wavelength (λd) @ IF=20mA |
620–625nm |
Yellow: 587–592nm / Yellow-Green: 565–570nm |
Peak λp: 625nm / 590nm / 565nm |
|
Forward Current (IF) |
30mA (peak IFP 160mA) |
Yellow 30mA / Yellow-Green 25mA (peak IFP 140/140mA) |
1/10 duty cycle, 0.1ms pulse width for peak rating |
|
Power Dissipation (Pd) |
69mW |
Yellow 75mW / Yellow-Green 62.5mW |
Absolute maximum at Ta=25°C |
|
Reverse Voltage / Reverse Current |
VR 5V max. / IR ≤10µA at VR=5V |
VR 5V max. / IR ≤10µA at VR=5V |
Same for both parts |
|
Operating / Storage Temperature |
-40°C to +85°C / -40°C to +100°C |
-40°C to +85°C / -40°C to +100°C |
Same for both parts |
|
ESD Sensitivity |
1000V |
1000V |
Handle as an ESD-sensitive device |
|
Lead Soldering Temperature |
250°C/10s or 217°C/60–150s, 2 reflow cycles |
250°C/10s or 217°C/60–150s, 2 reflow cycles |
Wave soldering peak 260°C/5s max |
|
Packaging |
200pcs/bag → 2,000pcs/inner carton → 16,000pcs/outer carton |
Same |
Anti-static bag packaging |
|
Reliability |
0/22 damaged |
0/22 damaged |
100-cycle temp cycling/thermal shock; 1,000hr storage & life test (Ta=25°C, IF=20mA) |
Note: the tables above cover WCN-144HR4-70N-086T and WCN-144GY2-70N-086T specifically. Other package sizes and color combinations in our range - 0605 / 0606 / 1210 / 3528 / 5050 / 5730, RGB, or RGB+W - run on separate datasheets, available on request.
Manufacturing Capability
We run this out of our own 12,000 sqm facility, which means production scheduling, quality control, and lead times stay under our direct control. Monthly output currently covers 240 million LED display pixels, 40 million DIP LEDs, 200 million SMD LEDs (Multi-Color SMD LED included), and 20 million LED digital/segment displays - capacity that scales from engineering samples up to full mass-production orders.
On the equipment side, die bonders, wire bonders, dispensing machines, and AOI (Automated Optical Inspection) systems are fully automated, which keeps the variance you'd normally get from manual assembly out of the process.
Quality is certified to ISO14001 (environmental management) and IATF16949 (automotive-grade quality management). AQL sampling inspection runs before every shipment, and 100% inspection is available for critical batches on request. On compliance, we hold RoHS, REACH, CE, and CCC certification, which covers export to the EU, North America, and China's domestic market.
Customization is available at several levels - color combination, package size, electrode layout, and Tape & Reel packaging can all be adjusted to fit your SMT line.
Frequently Asked Questions
Can you customize the pin layout to match our existing PCB footprint?
Yes. Based on your PCB layout or footprint drawing, we can customize chip arrangement, pin-out, and the overall package outline.
How is color consistency maintained across production batches?
See the Stable Color Mixing Performance section above - chip binning, VF matching, and CIE (x, y) re-verification after aging are the core controls.
Can you provide RoHS, REACH, or other compliance documentation?
Yes, RoHS and REACH documents are available. If you need a third-party test report - SGS, Intertek, etc. - we can arrange that on request too.
What end products commonly use Multi-Color SMD LED?
Smart home ambient lighting, LED display pixels, stage and architectural decorative lighting, appliance indicators, and consumer electronics or toy indicator lights are the common ones. In general, anywhere that needs multi-color or full-color output out of a small amount of board space.
For detailed datasheets, sample requests, or custom color/package specifications, please contact our sales engineering team.
Hot Tags: multi-color smd led, China multi-color smd led manufacturers, suppliers, factory

