Commercial Recessed Gimbal Downlights

Commercial Recessed Gimbal Downlights
Details:
The commercial recessed gimbal downlight is a low-profile, low-voltage recessed downlight built for installations where ceiling depth is limited and installation speed matters. It's the fixture engineers and contractors specify when a standard can-style downlight simply doesn't fit — false ceilings, drywall partitions, retrofit ceilings, and modular grid systems.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of commercial recessed gimbal downlights in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium commercial recessed gimbal downlights, welcome to get pricelist from our factory.

 

Technical Specifications

 

Product Name

LED Gimbal Downlight / Ultra-Slim Recessed LED Downlight

Body Type

Aluminum die-cast, ribbed heat-sink

Input Voltage

18 VDC–36 VDC (low voltage DC)

Max Power

7W

Color Temperature

3000K warm white / 4000K natural white (custom CCT available)

Overall Height

58.5mm

Cutout Diameter

ø50mm

Outer Flange Diameter

ø75mm

Fixing Hole Spacing

66mm (standard); 71mm (wide-flange version)

Connector

3-pin U Mate-N-Lock (Pin1 Red "+", Pin2 Green "C" dimming, Pin3 Black "-")

Dimmable Cable Length

200mm, pre-attached

Dielectric Strength

500 VAC @50Hz, 60 s

Operating Temperature

-25°C to 70°C

Dimming

Dimmable via dedicated dimmer board & control wiring (custom dimming signal upon request)

 

Ultra-Slim Structure

 

The core advantage of the LED gimbal downlight is its layered, ultra-thin construction. The assembly is built from a die-cast aluminum heat-sink body, a dimmer board, an LED driver board, a ø47mm diffusion screen, a fixing ring, and a trim flange with mounting holes. Each part quality-checked against a fixed bill of materials, so every unit leaving the factory matches the drawing exactly.


At just 58.5mm in overall height and a ø50mm cutout, this ultra-thin LED downlight fits inside ceiling voids that would reject a conventional deep-can fixture: plasterboard partitions, retrofit ceilings, and shallow plenum spaces in modular grid ceilings. The compact body still delivers a full 7W of usable output and passes the same 500V dielectric safety test as our full-depth product lines.


For specifiers comparing a slim gimbal downlight body against a traditional can downlight, the takeaway is simple: same output and safety rating, a fraction of the installation depth required.

product-800-985

 

Quick Installation

 

Every LED gimbal downlight is designed around field-friendly, repeatable installation:

 

  1. Drill to template - the pre-drilled trim flange follows a fixed hole spacing (66mm standard / 71mm wide-flange version), so installers use one drilling template (1:2 scale) across the entire project instead of re-measuring fixture by fixture.
  2. Position and tack - double-sided adhesive pads pre-fitted between the flange and ceiling ring give a temporary hold before final fixing, useful on suspended ceiling tiles or when a second person is driving screws.
  3. Connect and go - the 3-pin U Mate-N-Lock connector with pre-attached 200mm dimmable cable clips straight into the driver line. No wire-stripping, no field-terminating connectors.
  4. Secure - two M3x8 fixing screws lock the body into the ceiling ring for a permanent, vibration-resistant fit.

 

This standardized process is why the LED gimbal downlight is specified for fast-track fit-outs - hotel refurbishments, retail chain rollouts, office renovations - where every electrician on site needs to install the fixture the same way, every time, without a supervisor checking each unit individually.

product-800-1006

 

Built for Volume Orders

 

This LED gimbal downlight is set up for bulk procurement, with OEM/ODM support across wattage, CCT, beam angle, IP rating, and private labeling.

 

Common project types:

  • Hotel renovation - corridor, lobby, and guest-room recessed lighting replaced floor by floor
  • Chain retail rollouts - one standardized LED gimbal downlight spec across every store location
  • Office retrofits - replacing fluorescent wafer with slim LED panel lighting
  • Multi-unit residential - a repeatable recessed lighting spec for apartment and rental developments
  • Education and healthcare - glare-free, high-CRI lighting for spaces in long-duration use

 

An ideal alternative to bulky can-style housings and basic canless recessed downlight options, this tilt-adjustable fixture delivers directional lighting you will not get from flat wafer-style lights.

product-800-1032

 

Manufacturing Background

 

 

Benefit from 20+ years of proven lighting-industry manufacturing expertise. Every product benefits from end-to-end development support out of a 12,000 m² in-house facility located in Huizhou. Capabilities span circuit design, component selection, tooling, PCB assembly, full-product assembly, testing and final delivery.


All production is completed under one roof at the Huizhou manufacturing base, bringing engineering, mass-production and quality-inspection workflows together. With sales offices in Shenzhen and South Korea, customers gain direct access to distributors and project-focused support, eliminating trading intermediaries. This delivers more predictable lead times and stable pricing for repeat purchases and large-volume project orders.


Rigorous factory-level certifications guarantee consistent quality. The site is certified to ISO 14001 for environmental management and IATF 16949 - originally developed for automotive-supply-chain traceability and strict process-control requirements, setting higher benchmarks than certifications held by many standard lighting manufacturers. Products comply with RoHS, REACH, CE and CCC standards to satisfy global export-market requirements.

 

FAQ

 

 

Q: Is this shallow ceiling downlight suitable for retrofit projects?

A: Yes, this low-voltage DC recessed fixture is an excellent retrofit recessed light, widely used as hotel corridor downlight and an upgraded option over basic canless recessed downlight.

Q: Do I need a separate driver for this gimbal downlight?

A: Yes. This is an 18-36 VDC low-voltage fixture. An external constant-voltage driver is required and sold separately; the driver is not included with the light unit.

 

Send us your project specs, quantity, and target market, and we'll get back to you with lead time, certification files, and an OEM quotation.

 

Hot Tags: commercial recessed gimbal downlights, China commercial recessed gimbal downlights manufacturers, suppliers, factory

Send Inquiry
Send Inquiry