LED Display for Motorcycle Digital

LED Display for Motorcycle Digital
Details:
Our motorcycle LED display shows speed, RPM, fuel level, fault alerts, and Bluetooth status on a single instrument cluster. It works with CAN bus and mainstream ECU protocols out of the box, so most customers skip 4-6 weeks of validation work that a custom-built instrument system would normally require.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of led display for motorcycle digital in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium led display for motorcycle digital, welcome to get pricelist from our factory.

 

Display Technology

 

The panel uses high-brightness SMD LED dot-matrix technology with an anti-glare coating, so it stays readable in daylight and easier on the eyes at night. A constant-current driver IC handles point-by-point calibration and keeps brightness variation across the panel within ±5%. This is the detail that separates a clean, even display from the patchy look you get on lower-cost panels.

 

Viewing angle & brightness: 160° viewing angle, 1,000-1,500 cd/m² output. Readable under overcast skies and in direct sunlight.

 

Refresh rate: 60Hz+. Speed and RPM readings update smoothly with no visible lag.

 

Surface: Tempered glass or PC lens, resistant to scratching and UV yellowing.

product-800-800

 

Shock-Resistant Design

 

 

Motorcycle instrument displays deal with constant vibration and repeated shock loads that most consumer electronics were never designed to handle. Our answer is a reinforced metal bracket fitted with vibration-damping silicone pads. It spreads mechanical stress across the mounting points and cuts the risk of solder joint failure over time. We also secure critical components with spot-dispensed adhesive to resist fatigue cracking under sustained vibration.


Every unit goes through pre-shipment testing: random vibration testing per IEC 60068-2-64, high/low temperature cycling from -40°C to 85°C, and IP65-rated water and dust ingress testing. These are the same conditions the display will see in the field, and the results support a rated service life of 50,000+ operating hours.

 

Application

 

This motorcycle LED display fits folding e-bikes, electric scooters, electric mopeds, two-wheel motorcycles, off-road electric vehicles, and other handlebar-mounted electric vehicles running on lithium battery systems.

 

Customization Services

 

Panel dimensions, bezel shape, and logo dot-matrix patterns can be tailored to a specific model or brand. On the functional side, we can configure gear position indicators, tire pressure monitoring, fault code display, and Bluetooth connectivity to match your ECU protocol, including CAN, K-Line, and other common interfaces.


Sample units and small-batch trial production are available before you commit to a full order, so you can verify fit and function first. Our engineers stay involved through the whole process, from design approval to sample testing and production tooling.

product-800-800

 

Packaging and Shipping

 

Inner layer

Anti-static bags with foam padding.

Middle layer

Custom-molded blister trays that keep panels from shifting or scratching in transit.

Outer layer

Reinforced corrugated cartons wrapped in moisture-barrier film, rated for ocean freight.

Each carton includes shipping marks, a packing list, and a certificate of conformity to help with customs clearance. We ship by sea, air, or express courier and can recommend the best option based on your order volume, lead time, and destination.

 

FAQ

 

 

What waterproof rating does this LED display reach?

The display is sealed with conformal potting for dust and water protection and reaches an IP65 rating. It holds up against splashing water while riding and is built for all-day outdoor use.

Have you completed display projects for other electric vehicles? What kinds of equipment have you served?

Yes. Our displays are currently used on folding e-bikes, electric scooters, electric mopeds, and off-road e-bikes, and we take on custom development for other vehicle types on request.

Can I customize the indicator icons, ambient light color, and button hole layout?

Yes, OEM and ODM customization is supported. Ambient light color, display icons, hole positions, and wiring definitions can all be adjusted to match your product requirements.

 

Send us your target market, order volume, and any certification requirements, and we'll get back to you with a tailored quote and technical proposal within one business day.

 

Hot Tags: led display for motorcycle digital, China led display for motorcycle digital manufacturers, suppliers, factory

Send Inquiry
Send Inquiry