WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of fpc strip light in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium fpc strip light, welcome to get pricelist from our factory.
Flexible FPC Circuit Board Construction
Substrate: Our FPC circuit board LED strip uses a polyimide (PI) base film instead of the glass-fiber epoxy (FR4) used in rigid strips. PI film holds up across a wide temperature range (-40°C to 150°C) and resists cracking under repeated flexing.
Copper and etching: Traces are etched to fine-pitch tolerances, with copper foil thickness available at 0.5oz / 1oz / 2oz depending on current load and thermal target. Heavier copper improves conductivity and spreads heat laterally across the strip.
Surface finish: ENIG (immersion gold) or OSP finishing, selected based on your soldering process and shelf-life requirements.
Flex durability: Each production batch is bend-tested to 100,000 flex cycles at rated bend radius before approval to ship - this is our internal QC threshold, applied to every batch regardless of order size, and it targets the failure point we see most often reported with lower-grade flexible strips.

Ultra-Thin, Bendable Structure
Thickness
0.3mm–0.8mm depending on copper weight and protective coating (vs. 1.0mm–1.6mm for standard rigid PCB strips)
Minimum bend radius
10–15mm on standard constructions, allowing full 360° wraparound on cylindrical or conical surfaces
Form factor
Die-cut, shaped, or pre-formed to match your mechanical drawing - not limited to a straight bend
Heat Dissipation Performance of FPC Strip Lights
PI substrate has lower intrinsic thermal conductivity than aluminum-based MCPCB, so heat dissipation on an FPC strip light depends on structural design rather than the substrate alone:
A thin cross-section shortens the heat path from LED junction to mounting surface
Full-surface bonding to aluminum profiles or heatsinks compensates for the substrate's lower conductivity by maximizing contact area
A distributed copper layout spreads thermal load across the strip instead of concentrating it at individual LED points, reducing hot-spot-driven light decay
In internal bench tests at equivalent drive current (aluminum-channel-mounted vs. unmounted, same wattage), our FPC strips ran 8–12°C cooler at the LED surface - a difference relevant to L70 lifespan performance under sustained operation. For high-density FPC strip light installs, we recommend aluminum profile mounting over adhesive-only mounting on non-conductive surfaces.

Application Scenarios
Ideal for indoor and outdoor architectural lighting, cabinet & furniture contour lighting, automotive interior decoration, retail display lighting, signage backlighting, and customized intelligent lighting equipment. Suitable for curved, narrow, and 360° surround installation environments.
Custom FPC Strip Light Manufacturing
As a custom FPC strip light manufacturer, we support:
Dimensions: custom length, width, and cut points to match your housing or profile
Optical output: CCT 2700K–6500K, CRI80/90/95, custom binning available
Protection rating: IP20 (indoor, dry) up to IP65/IP67 (wet-location, outdoor) via silicone or resin encapsulation
LED type and density: SMD or COB chip selection, high-density to standard pitch spacing
Connection interface: custom connector types and pad layouts to match your existing product architecture
Copper weight and layer count: adjusted per current draw and thermal requirement
Typical process: mechanical drawing or reference sample → engineering review (1 business day) → sample production (3 business days for standard specs) → sample confirmation → mass production. MOQ and lead time are confirmed per project during quotation. Our engineering team reviews DFM feedback with your team before tooling, which is where most spec mismatches get resolved.

Certifications & Quality Assurance
Certification options include UL, CE, and RoHS, with IP-rated variants tested to IEC 60529. Each production run includes flex-cycle testing, thermal cycling, and lumen maintenance checks before shipment. Warranty terms vary by application and duty cycle and are confirmed at the order stage.
Send us your mechanical drawing, target CCT/CRI, IP rating, and installation environment. We'll return a spec sheet and lead time within 1 business day.
Hot Tags: fpc strip light, China fpc strip light manufacturers, suppliers, factory
