WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of led cool white 5000k smd in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium led cool white 5000k smd, welcome to get pricelist from our factory.
Compact Design, Built for SMT Lines
Standard package footprint. Available in mainstream SMD packages (2835 / 3030 / 5730, depending on part number), compatible with common pick-and-place machines and solder paste printing equipment. It fits into your existing line without retooling.
Chips are mounted using eutectic bonding, which reduces shifting and tombstoning during reflow soldering and keeps defect rates on the SMT line down.
Packaging is MSL-rated (IPC/JEDEC compliant) and vacuum-sealed according to moisture sensitivity level, with baking guidance provided to prevent popcorn-effect failures during reflow.
Tape & reel packaging works with automated feeder systems, which cuts down on manual sorting.
For factory buyers, that means fewer steps between incoming inspection and the production line, and lower line-setup cost.

Consistent Color, Order After Order
Color temperature drift between production batches is one of the most common complaints with cool white 5000K SMD LEDs. We control for it a few ways:
LEDs are binned by color coordinates (CIE 1931/1976) and sorted within a ±100K CCT range, so color variation within a single order stays tight enough for side-by-side use in the same fixture.
CRI is ≥80Ra on the standard version, with a ≥90Ra high color-rendering option available for commercial lighting where accurate color rendering matters.
Each production batch is sample-retained with recorded photoelectric test data. If a color dispute comes up later, it can be traced back to the actual batch rather than argued over after the fact.
Specifications
|
Parameter |
Specification |
|
Model No. |
WCN-3030NW-120-0E-50-80-075W |
|
Chip Material |
InGaN |
|
Correlated Color Temperature (CCT) |
5000K (Cool White), color tolerance 3-SDCM/5-SDCM optional |
|
Color Rendering Index (CRI) |
≥80Ra (Min, @IF=65mA) |
|
Forward Voltage (VF) |
2.6–2.8V / 2.8–3.0V / 3.0–3.2V (3-bin sorted, @IF=65mA) |
|
Luminous Flux |
36–42 lm @ IF=65mA; 65–85 lm @ IF=150mA |
|
Max. Forward Current (IF) |
180mA (Peak Forward Current IFP 300mA) |
|
Max. Power Dissipation (Pd) |
576mW |
|
Viewing Angle |
120° |
|
Package Dimensions |
3.0 x 3.0 x 0.55mm |
|
Packaging |
Tape & Reel, 4,000 pcs/reel |
|
Certifications |
RoHS, CE. |
|
Operating Temperature |
-30°C to +85°C |
|
Storage Temperature |
-40°C to +100°C |
|
ESD Rating |
1000V to 2000v |
Long-Term Supply
We source chips from fixed upstream suppliers under long-term partnerships, which avoids the color and efficacy drift that comes from switching chip sources between batches.
Standard part numbers are kept in stock. Non-standard or custom configurations have production slots reserved in advance, with priority scheduling communicated ahead of peak seasons such as year-end demand spikes.
Returning customers get a dedicated batch record on file, so repeat orders don't drift in spec from the original approved sample.
When the industry runs into disruptions - raw material price increases, chip shortages - we let customers know and offer alternatives early, rather than waiting until an order is already overdue.

Buyer Questions We Get Often
Will the actual CCT match the datasheet?
We provide binning and spectral test reports, plus pre-production samples for confirmation before mass production begins.
Will color be consistent across batches?
We walk through our binning logic and batch sample retention and traceability process upfront.
Will this run on our SMT line without issues?
We provide package drawings, pick-and-place parameters, MSL rating, and baking guidance in advance.
Can we count on stable lead times?
We explain our stock strategy and production scheduling, and can sign long-term supply agreements to lock in price and capacity for larger programs.
Will the paperwork clear customs at our destination market?
We confirm the certifications your target market requires - CE, UL, RoHS, REACH, and others - before shipment, not after.
If you're sourcing a color-consistent, reliably-supplied 5000K cool white SMD LED for your project, send us your application details - fixture type, SMT line parameters, and target market certification requirements - and we'll get back to you with a full quote and sample availability.
Hot Tags: led cool white 5000k smd, China led cool white 5000k smd manufacturers, suppliers, factory

