Automotive High Power Led

Automotive High Power Led
Details:
Our Automotive High Power LED is engineered for headlights, fog lamps, daytime running lights (DRL), and adaptive lighting systems that demand high brightness, long service life, and reliable performance under harsh under-hood conditions.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of automotive high power led in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium automotive high power led, welcome to get pricelist from our factory.

 

High Lumen Flux Density

 

Automotive lighting design is a constant trade-off between output, size, and heat. Our Automotive High Power LED addresses this directly with a lumen output density significantly above standard commercial-grade LEDs of the same package footprint, achieved through optimized chip layout and a low-thermal-resistance package structure.


Smaller light-emitting surface for the same lumen output → more compact headlight/fog light modules


Lower drive current required to reach target brightness → reduced power draw and extended driver life


More concentrated light source → easier to control beam pattern and cut-off line precision in reflector or projector optics

product-800-800

 

Good Thermal Stability

 

 

The engine bay and headlight cavity are among the most thermally demanding environments an LED will ever operate in - sustained high ambient temperature, long continuous on-time (some markets require DRL to run for the full ignition cycle), and constant vibration.Our Automotive High Power LED is built to hold up under exactly those conditions:

 

  • Ceramic substrate + eutectic bonding for low thermal resistance and stable junction-to-case heat transfer
  • Junction temperature control engineered to maintain stable lumen output across the rated operating range
  • Lumen maintenance tested per LM-80 / IES TM-21, with projected L70 lifetime data available for your reliability calculations
  • Vibration and thermal cycling tested per AEC-Q102 requirements for automotive-grade components

 

Optical Design Capability

 

 

A high-performance LED chip is only half the equation - beam control is where headlight and fog light programs succeed or fail. Our optical engineering team supports customers from concept through validation with:

 

  • Custom beam angle and light distribution design for low beam, high beam, and fog light cut-off requirements
  • Optical simulation (ray-tracing) to predict beam pattern before tooling, reducing costly reflector/lens rework
  • Sample-and-iterate validation process, with physical prototypes matched against simulation data
  • Support for both reflector-based and projector-based headlight architectures

 

If you're developing a custom automotive lighting solution and need chip-level input on optical performance, our team can review your reflector/lens design and recommend chip configuration accordingly.

 

Specifications

 

 

We currently offer two Automotive High Power LED configurations - a single-color cool white version and a 3-in-1 RGB version - both built on the same 350mA platform. 

Parameter

WCN-3535CW-120-CE-65 (White)

WCN-03L2RGB-120-CE (RGB)

Chip Material

InGaN

InGaN

Package Size

3.45mm × 3.45mm × 1.9mm

14.5mm × 8.0mm × 5.2mm

Viewing Angle

120°

120°

Power Dissipation (Pd)

1190mW

R: 840mW / G: 1190mW / B: 1190mW

Forward Current (IF)

350mA

350mA

Peak Forward Current (IFP)

700mA

700mA

Forward Voltage (Vf, IF=350mA)

2.8–3.4V (3 bins)

R: 1.8–2.4V / G, B: 2.8–3.4V

Luminous Flux (Iv, IF=350mA)

90–120 lm (3 bins)

R: 30–40 lm / G: 60–70 lm / B: 10–20 lm

Correlated Color Temperature (CCT)

6000K–6500K (cool white)

-

Dominant Wavelength (WL)

-

R: 620–625nm / G: 520–525nm / B: 465–470nm

Reverse Voltage (VR)

5V

5V

ESD (HBM)

1000V

1000V

Thermal Resistance (Rth j-s):

≤4.5 °C/W

≤4.5 °C/W

Operating Temperature

-30°C to +85°C

-30°C to +85°C

Storage Temperature

-40°C to +100°C

-40°C to +100°C

Packing

Tape & reel, 1,000 pcs/reel

Tape & reel, 1,000 pcs/reel

Certifications

AEC-Q102 qualified, RoHS compliant, CE, lead-free reflow compatible

AEC-Q102 qualified, RoHS compliant, CE, lead-free reflow compatible

Full datasheets (including optical curves, reflow profile, and reliability test data) available on request. Custom CCT binning and flux binning available for OEM/ODM programs.

 

Why Choose Us

 

 

Automotive-grade manufacturing - production line and quality system aligned with AEC-Q102 requirements, with full lot traceability from wafer to finished chip

20 years exporting automotive LED components, supplying Tier 1 lighting manufacturers and aftermarket brands across 20+ countries

 

In-house optical and thermal engineering support - we help validate your design before tooling

100% pre-shipment aging and binning inspection on every production batch

Responsive technical support - direct access to our engineering team during your design and qualification phase

 

FAQ

 

 

What's the difference between an automotive high power LED and a standard commercial LED?

Automotive high power LEDs are qualified to AEC-Q102 standards, tested for wider temperature range, vibration resistance, and long-term lumen maintenance under continuous operation - requirements standard commercial LEDs are not designed or tested for.

Can you provide samples for testing before we place an order?

Yes, free or low-cost samples are available for qualified automotive lighting projects. Please share your target power, CCT, and application (headlight, fog light, DRL, etc.) so we can recommend the right configuration.

What is your minimum order quantity (MOQ)?

MOQ varies by chip configuration and customization level. Standard configurations typically have lower MOQs; custom binning or package sizes may require higher volumes. Contact us for MOQ based on your specific requirement.

Ready to move your headlight, fog light, or DRL program forward?

Contact our technical team for the full datasheet, AEC-Q102 test reports, and free samples for your automotive lighting project. Our engineers typically respond within 24 hours.

 

Hot Tags: automotive high power led, China automotive high power led manufacturers, suppliers, factory

Send Inquiry
Send Inquiry