WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of pcba manufacturing in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium pcba manufacturing, welcome to get pricelist from our factory.
Core Equipment
High-speed SMT component mounter
X-ray inspection tester
Multi-zone reflow oven
High-speed AOI optical inspector
Industrial wave-solder machine
Temperature-humidity environmental test chamber
Certifications: ISO 14001 (Environmental Management System), IATF 16949 (Automotive Quality Management System). Certificates and audit documentation are available on request.
Whether you need a single prototype board for design validation or a long-term mass production partner, our production lines are built to scale with your project's stage - from NPI (New Product Introduction) through volume manufacturing.

Assembly Process
Our PCB assembly process follows a strict, traceable nine-stage workflow. Every board that leaves our factory passes through the same quality gates, regardless of order quantity.
Incoming Quality Control (IQC)
All incoming components (resistors, capacitors, ICs, connectors) are inspected against datasheets and purchase specifications before entering the line. Moisture-sensitive devices (MSD) are logged and stored per JEDEC J-STD-033 humidity control standards.
Solder Paste Printing & SPI
Solder paste is printed via laser-cut stainless steel stencils. 3D Solder Paste Inspection (SPI) measures paste height, volume, and offset on every board, catching printing defects before placement.
SMT Placement
High-speed pick-and-place machines mount SMD components, supporting packages as small as 0201 and including BGA.
Reflow Soldering
Boards pass through multi-zone reflow ovens with controlled thermal profiles to ensure consistent solder joints and avoid thermal shock to sensitive components.
AOI (Automated Optical Inspection)
Post-reflow AOI screens every board for tombstoning, bridging, insufficient solder, and component misalignment.
THT/DIP Assembly (where applicable)
For mixed-technology boards, through-hole components are manually or selectively wave-soldered, followed by visual inspection.
X-Ray Inspection
For hidden solder joints under BGA, QFN, and LGA packages, X-ray inspection verifies voiding levels stay within IPC-A-610 acceptance criteria.
Functional Testing (FCT) / In-Circuit Testing (ICT)
Each board undergoes electrical testing against customer-defined parameters to confirm functional performance before final assembly.
Final Inspection & Packaging
Boards are cleaned (if required), labeled with traceable serial numbers, and packed to ESD-safe standards (moisture barrier bags, desiccant, ESD trays) for international shipment.
Reliable PCBA Testing
Every order is validated against the following test coverage and standards before it ships.
Testing Coverage
|
Test |
Description |
|
ICT (In-Circuit Testing) |
Verifies component values, shorts, opens, and correct placement against the netlist |
|
FCT (Functional Circuit Testing) |
Simulates real-world operating conditions to confirm the board performs its intended function |
|
AOI (Automated Optical Inspection) |
Inline screening for visible solder and placement defects |
|
AXI (Automated X-Ray Inspection) |
Inline coverage for hidden solder joints under BGA/QFN/LGA packages |
|
Burn-In / Environmental Stress Screening (ESS) |
Available for customers requiring extended thermal cycling or power-on testing to screen out early-life failures |
|
Flying Probe Testing |
Used for low-volume/prototype boards where a dedicated ICT fixture isn't cost-effective |
Quality standard
All assembly work follows IPC-A-610 Class 2 (General Electronics) by default, with Class 3 (High Reliability - aerospace, medical, automotive) available on request.
01
Traceability
Every PCBA is assigned a unique serial number linked to its production batch, component lot numbers, test results, and operator records, allowing full traceability for field failure investigations.
02
Quality performance
First Pass Yield (FPY) and escaped-defect rate figures are tracked by product line and available for review during supplier qualification. Full ICT/FCT/AOI test reports and a Certificate of Conformance (CoC) are provided with every shipment on request.
03
Failure analysis
For customers requiring root-cause analysis on field returns, we offer cross-sectioning, micro-section analysis, and failure mode reporting to support corrective action.
04
Reliability Lab Equipment
High-low temperature/humidity aging chambers (−40°C to +105°C, for temperature cycling and high-temp/high-humidity testing)
- LED photoelectric testers (for LED tubes up to 1.2 m in length)
- Transistor curve tracers
- Vibration test machines
- Salt spray corrosion testers
- RoHS & ELV environmental testers (Hitachi SEA1000AIII)
- X-ray coating thickness testers (Hitachi FT110A)
Aging test protocols cover full-process verification for new product R&D as well as routine monthly, quarterly, and annual sampling for mass-produced lines. Testing includes 1,000-hour room-temperature endurance, high-temperature endurance, temperature-change cycling, and high-temp/high-humidity chamber testing.

Why Choose Us
Proven experience. Established in 2006, we have supplied PCBA manufacturing for customers across multiple industries and regions, including:
Automotive & industrial: Partners including Toyota, Nissan, Hyundai, KUKA, and Otis Elevator, with shipments to Japan, Korea, and Europe.
Consumer electronics & home appliances: Long-term supplier to Sony, Samsung, LG, Panasonic, and Haier, serving customers across North America, Europe, and Southeast Asia.
Cross-industry & global brands: Additional customers include Disney, McDonald's, Decathlon, and IBM, with further coverage across Latin America, India, and South Africa.
Shipping coverage: United States, Germany, Italy, France, Spain, Turkey, Japan, Korea, Brazil, Mexico, India, South Africa, Thailand, Malaysia, Vietnam, Argentina, and Singapore.
Recognized certifications. ISO 14001, IATF 16949 - certificates available for verification during your supplier audit.
Fast engineering response. Direct access to assigned process engineers (28+ on staff), with DFM feedback and formal quotations returned within 24 hours of BOM/Gerber submission.
Transparent quality control. We support third-party inspections (SGS, TÜV, etc.) and factory audits. Full ICT/FCT/AOI test reports are shared with every shipment on request.
Send us your Gerber files and BOM for a free PCBA manufacturing quote. Our engineering team will respond with DFM feedback and pricing within 24 hours.
Hot Tags: pcba manufacturing, China pcba manufacturers, suppliers, factory
