WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of pcb power board for oven in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium pcb power board for oven, welcome to get pricelist from our factory.
High-Temperature Reliability
Ovens routinely operate in the 150°C–250°C range near the cavity, and ambient temperatures inside the control compartment can still reach 85°C–105°C even with ventilation.We use high-Tg (glass transition temperature) FR4 laminate rated at ≥170°C, with metal-core PCB (MCPCB) options available for applications with concentrated heat loads near heating relay circuits. All boards use heat-resistant solder mask and thermally stable copper foil to prevent delamination and pad lifting under repeated thermal cycling.
- Thermal cycling test: 1,000+ hours of high-low temperature cycling (typically -20°C to 250°C) with functional verification before and after
- Component placement engineering: heat-sensitive components (electrolytic capacitors, ICs, optocouplers) are positioned at a validated minimum clearance from heat-generating elements such as relays and heating element drivers
- Thermal relief and copper pour design: optimized copper distribution to draw heat away from sensitive junctions
- Burn-in testing: every batch undergoes a burn-in run under rated load prior to shipment to catch early-life component failures

Appliance Safety Protection
Safety certification is typically the first screening criterion for buyers sourcing a PCB power board for oven, particularly for shipments into the EU, North America, and other regulated markets. Our boards are designed to meet, and our manufacturing facility is audited against, the following standards:
- CE (Low Voltage Directive and EMC Directive compliance for the EU market)
- UL / UL94 V-0 flame-retardant rating on all PCB substrates and enclosure-adjacent components
- RoHS 2.0 and REACH compliance for restricted substances
- CQC certification available for the China market on request
- IEC 60335-1 household appliance safety alignment for control circuit design

Technical Specifications
|
Parameter |
Specification |
|
Substrate material |
High-Tg FR4 (Tg ≥170°C) / Metal-core PCB (aluminum or copper base) available |
|
Layer count |
1–6 layers, customizable per circuit complexity |
|
Board thickness |
0.8mm – 2.4mm |
|
Copper weight |
1oz – 4oz standard, heavier copper available for high-current traces |
|
Operating voltage |
AC 100V – 240V (custom voltage ranges available) |
|
Rated current |
Up to 30A per circuit, application-dependent |
|
Operating temperature range |
-20°C to 250°C (board-level ambient rating) |
|
Flame retardant rating |
UL94 V-0 |
|
Surface finish |
ENIG (immersion gold) / HASL / OSP |
|
Dimensional tolerance |
±0.1mm |
|
Solder mask |
Heat-resistant, high-temp rated LPI solder mask |
|
Silkscreen |
Epoxy-based, high-temperature stable |
|
Connector interfaces |
JST, Molex, terminal block, or customer-specified |
|
Certifications |
CE, UL, RoHS, REACH; CQC available on request |
|
MOQ |
500–1,000 pcs (sample/prototype orders accepted) |
|
Sample lead time |
7 working days |
|
Mass production lead time |
15 days, volume-dependent |
All the aforementioned parameters represent our standard configuration. The board outline, connector layout, power rating, layer stack-up, and mounting hole pattern can all be customized to match your existing oven chassis and wiring harness.
Frequently Asked Questions
Our previous supplier's boards showed copper oxidation and weak solder joints after a year in the field. How do you prevent this?
We control this at the material stage with high-purity copper foil and a controlled ENIG gold thickness, and every production batch goes through salt-spray testing before it's released.
We have observed fluctuations in the baking temperature during product use; how can this be resolved?
NTC thermistors and their sensing circuits can drift after repeated thermal cycling, and end users notice it as inconsistent baking results even when nothing else has changed. We test the thermistors for consistency before putting them into service and implement temperature compensation directly within the control firmware.
We run high volumes - how do you guarantee batch-to-batch consistency at scale?
Since even small batch-to-batch variance turns into assembly line issues or warranty claims downstream. Every panel goes through SMT automated placement and AOI (automated optical inspection), and every board goes through ICT (in-circuit testing) before packing - so unit #10,000 in a shipment tests the same as unit.
Send over your chassis drawing, electrical requirements, or existing BOM, and we'll come back within 24 hours with technical feedback and a quote. If you want to see the boards before committing to production, we can also send samples along with certification documents and test reports for your own review.
Hot Tags: pcb power board for oven, China pcb power board for oven manufacturers, suppliers, factory
