Mini Action Camera Motherboard

Mini Action Camera Motherboard
Details:
This action camera motherboard is the core board behind your device's size, battery life, image quality, and speed to mass production. As a compact, ready-to-integrate camera motherboard, it fits directly into helmet cameras, cycling recorders, pet cameras, and similar compact recording devices.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of mini action camera motherboard in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium mini action camera motherboard, welcome to get pricelist from our factory.

 

Compact, High-Density Motherboard Design

 

6-layer stack-up, board thickness under 1.0mm - more internal room for the battery compartment and stabilization module

 

Stepped board layout with flex-cable interconnects for a smaller footprint and clean signal routing

 

Dense component placement with EMI/EMC handling built into the layout stage. This keeps signal integrity and thermal performance stable even at this compact size

 

DFM review runs alongside your industrial design (ID) drawings starting from the schematic stage. Clearance conflicts get flagged early, before the first prototype is built

product-800-768

 

Video Processing and Onboard Hardware

 

The motherboard ships with:

  • H.264 and H.265 dual codec support
  • Electronic Image Stabilization (EIS), calibrated to minimize the warping and over-correction common in lower-cost boards
  • HDR/WDR for high-contrast outdoor and underwater shooting
  • Slow-motion capture at higher frame rates
  • Six-axis gyroscope interface, pre-integrated for motion sensing and stabilization
  • Dual-microphone circuit with hardware-level noise reduction
  • Wi-Fi/Bluetooth module footprint, ready for direct integration
  • microSD (TF) card storage circuit built into the layout

 

Wi-Fi, gyroscope, and microphone interfaces are pre-integrated at the board level. The motherboard mounts directly into your housing with no secondary hardware integration step. It also ships with driver-level software support, so your team can begin app and firmware development right away.

product-800-786

 

Power Management and Battery Optimization

 

  • Low-power PMIC supporting 5V/1A fast charging
  • Standby current as low as 10 µA (final figure confirmed with your sample based on configuration)
  • Triple protection circuitry: overcharge, over-discharge, over-temperature
  • Compatible with 3.7V lithium polymer battery packs

 

Send us your battery's capacity and discharge specs during sample testing, and we'll calibrate the charge/discharge profile to match your pack. For export-bound products, we also prepare UN38.3 test reports and MSDS documentation.

product-800-730

 

 

 

Built for Customization

 

What can be customized on this motherboard 

Item

Description

Image sensor

For different resolution and price tiers

Interface

USB-C / Micro-USB / USB 2.0

Wi-Fi module

Based on target region and budget

Boot logo and app branding

Custom boot logo and app branding

Structural fit

Matched to your housing and mold design

 

Three ways to source your motherboard

Option

Description

Off-the-shelf baseline board

Fastest turnaround, minimal changes

Baseline board with parameter tuning

Sensor, interface, or firmware adjustments on the standard design

Full ODM development

A custom motherboard built to your product requirements

 

Lead Times

Order Type

Lead Time

Standard samples

3–5 business days

Small-batch orders

About 1 week

Larger production runs

Up to 2 weeks, depending on customization scope

 

We also prepare the technical documentation for FCC/CE certification to help shorten your compliance review.

 

Thumb camera PCBA solution, mini camera control board assembly

 

FAQ

 

 

What's the MOQ for a customized motherboard?

500 units for parameter-tuned boards. No MOQ for off-the-shelf samples. Full ODM development typically starts at 1,000–3,000 units, depending on sourcing and tooling.

Can I get a sample before placing a production order?

Yes. Standard samples ship in 3 business days. See "Built for Customization" above for how sensor, interface, or firmware changes affect this timeline.

Can this motherboard work with a battery I've already selected?

Yes. Send your battery's capacity, voltage, and discharge specs during sample testing, and we'll calibrate the power profile to match.

Looking to source a motherboard for your next action camera?

Request a sample, send your battery and housing specs, or talk to our engineering team about a full ODM build.

 

Hot Tags: mini action camera motherboard, China mini action camera motherboard manufacturers, suppliers, factory

Send Inquiry
Send Inquiry