Right Angle 2 LED Indicator Array

Right Angle 2 LED Indicator Array
Details:
The Right Angle 2 LED Indicator Array packs two LEDs into a single bent package for front-panel mounting. The leads insert vertically into the PCB in the normal way. The light-emitting head is pre-formed at 90°, so it aims straight out through a front-panel cutout.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of right angle 2 led indicator array in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium right angle 2 led indicator array, welcome to get pricelist from our factory.

 

Features & Advantages

 

No light pipe required. A standard vertical LED needs a light pipe, or a manual bend during assembly, to redirect its output toward a front panel. On this array the bend is molded into the housing. The leads still insert into the PCB the normal way.

 

Built-in dual-status indication. Two separate LED lamps with individual dome-shaped lenses, built-in internal light barrier eliminates cross-color interference.

 

Adjustable viewing angle and brightness. A wider lens spreads light over more area at lower perceived brightness. A narrower, water-clear lens concentrates the same output into a tighter, more intense beam. For most front-panel and control-panel indicators viewed from a short distance, a diffused wide-angle lens works well. A clear lens suits indicators that need to be visible from farther away or at an angle.

 

This right-angle LED indicator, available in both THT through-hole and SMD surface-mount versions, can be customized in color, lens type, lead form, pin pitch, and packing to match your PCB layout and panel design. See the standard baseline below.

product-800-800

 

Specifications

 

Parameter

Spec (standard range)

Selection Note

Number of LEDs

2PCS

Supports dual-status indication, e.g. power + link

Mounting Angle

90°right angle

Light output is perpendicular to the PCB, suited to front-panel exit

LED Color

Red/Green, Red/Yellow, single-color, bi-color

Color combination affects driver IC logic - confirm before finalizing Gerber files

Lens Type

Diffused / water clear

Diffused gives a wider viewing angle; clear concentrates brightness

Viewing Angle

100°–120°

Go wider if panel cutout tolerance is tight

Luminous Intensity

20–80 mcd (color-dependent)

Re-check actual brightness once enclosure color and cutout size are final

Forward Voltage (VF)

1.8V–3.2V (color-dependent)

Needed to calculate the current-limiting resistor

Forward Current (IF)

20 mA typical / 30 mA max

Continuous operation at max current will shorten service life

Pin Pitch

2.54 mm THT standard, SMT on request

Must match your PCB pad layout

Lead Length

Customizable, typically 6–10 mm

Sets the mechanical gap between PCB and front panel

Operating Temperature

−25°C to +85°C

Specify the wide-temp version for industrial/outdoor use

Storage Temperature

−40°C ~ +100°C

-

Certifications

RoHS, REACH, CE, CCC

Test reports available for supplier audits

Factory Certification

ISO14001, IATF16949

Applies to the Huizhou facility

Packing

Tape & reel / tube

Tape & reel recommended for automated insertion lines

All parameters above can be customized against this standard baseline.

 

Applications

 

 

Networking equipment (switches, routers): right angle LED indicator for link/activity status on the front panel

 

Servers and rack equipment: panel-mount LED for power and drive status

 

Industrial control (PLCs, inverters): run/fault indication on control panel LED arrays

 

Medical devices: standby/operating status indicators (medical-specific certification available on request)

 

POS terminals and self-service kiosks: payment/transaction status LEDs

 

Security equipment: access control and alarm panel indicators

 

Ordering & Lead Times

 

 

Standard part numbers are usually in running production and can ship from stock. Customized versions in a different color, lens, or lead form typically take7~14working days to produce for a first order. Lead time depends on how much changes from the baseline spec.


Pricing follows standard volume breaks (1K / 5K / 10K / 50K+), based on your expected order volume for the relevant tier. Samples are available before you commit to a bulk order.


We accept T/T and L/C, and can ship FOB, EXW, or CIF from Shenzhen or Huizhou. Third-party inspection through SGS or Bureau Veritas can be arranged before shipment if your QA process requires it.

 

FAQ

 

 

How is a right-angle LED different from a standard vertical LED?

A standard vertical LED shines straight up from the PCB, so reaching a front panel usually means adding a light pipe or bending the leads by hand. This package has the 90° bend built into the housing. The leads insert normally, and the light exits straight out toward the panel.

How do I confirm the pin pitch matches my PCB layout?

Send us your Gerber file or pad layout drawing. Our engineering team will check it against the standard 2.54 mm pitch, or propose a custom footprint if your layout needs one.

What's the expected lifespan, and does continuous full-current operation shorten it?

Yes. Running at the 30 mA maximum continuously will reduce service life compared to the 20 mA typical rating. For always-on indicators, we recommend designing the current-limiting resistor around the typical current rather than the max.

Is this part ESD-sensitive, and how should it be handled during assembly?

Like most LED packages, it carries some ESD sensitivity. Standard ESD-safe handling during placement and reflow/wave soldering is sufficient. No special grounding beyond your normal SMT/THT line precautions is required.

How do I get a quote for my design?

Send us your PCB Gerber file or panel cutout dimensions. We'll confirm the right configuration along with tiered pricing for your volume. Our team is based across Shenzhen and Korea with direct access to the Huizhou production line, and typically responds within one business day.

 

Hot Tags: right angle 2 led indicator array, China right angle 2 led indicator array manufacturers, suppliers, factory

Send Inquiry
Send Inquiry