Dotless COB Strip Lights

Dotless COB Strip Lights
Details:
Our Dotless COB Strip Lights use Chip-on-Board (COB) packaging technology to bond LED chips directly onto a flexible FPC substrate at densities of 224 to 560 LEDs per meter. The result is a continuous line of light with no visible hot spots, even at viewing distances under 10cm.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of dotless cob strip lights in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium dotless cob strip lights, welcome to get pricelist from our factory.

 

Core Advantages

 

Dotless, Shadow-Free Illumination The high-density COB array removes the "corn-on-the-cob" dot pattern found in standard strip lights. No thick diffuser cover is needed to hide individual LED points, which lowers the profile depth required in cabinetry and trim design.

 

Flicker-Free Operation The strips use constant-current driver circuitry compatible with high-frequency PWM dimming. Flicker index stays within IEEE 1789 recommended practice for low-risk visual comfort.

 

Flexible, Field-Installable Design The FPC substrate bends around curves and corners without cracking the circuit trace. Cut points are marked at regular intervals for on-site trimming.

 

Long Operational Life The strips are tested for L70 performance (70% of initial lumen output) over 50,000+ hours of continuous operation under standard test conditions, supported by a thermally conductive FPC substrate and controlled current draw.

 

Simplified Installation Solder-free quick connectors, standardized cut-line spacing, and self-adhesive backing reduce on-site labor time.

product-800-800

 

Color Quality

 

CRI/Ra

Standard Ra90+. Ra95+ and full-spectrum Ra97+ variants are available for jewelry counters, art displays, photography studios, and high-end retail.

01

CCT

2700K to 6500K, including tunable white (CCT-adjustable) options.

02

Color Consistency (SDCM)

Binned to ≤3 SDCM (MacAdam ellipse). Strips installed side by side, including strips from different production batches, will not show visible color variation along the run.

03

Spectral Power Distribution

The phosphor formulation approximates a continuous natural daylight curve. This affects how skin tones, fabrics, and printed materials appear under the light, compared to the spiked spectral output typical of low-cost white LEDs.

04

Selection guidance

Ra80-85 covers general ambient or hospitality corridor lighting. Ra90+ suits retail and residential feature lighting. Ra95+ is for color-critical commercial applications. Specifying above project requirements adds cost without added visible benefit.

05

 

Customization by Application

 

Application

Recommended Customization

Hotel & Hospitality Linear Lighting

Ra95+, 2700K-3000K warm white, flicker-free driver compatibility, silent operation

Retail & Jewelry Display Cases

High-density COB (320-560 LEDs/m), anti-glare diffuser, Ra95+

Outdoor & Landscape Lighting

IP65, IP68 optional with UV-resistant silicone sleeve, reinforced FPC backing

Smart Home Integration

RGB+CCT tunable, DALI/Zigbee/Bluetooth/WiFi protocol compatibility

Architectural Coving & Trim Lines

Custom-length runs, 90° corner connectors, seamless joint kits

 

FAQ

 

 

What's the minimum order quantity (MOQ) for custom Dotless COB Strip Lights?

Standard specifications: MOQ starts at 500m per color/CCT. Custom CCT, connector, or packaging configurations: MOQ starts at 3,000m to cover tooling and production setup. Contact our sales team with your target volume for an exact quote.

How long does sampling and mass production take?

Samples ship within 3 days of order confirmation. Small-batch orders (under 3,000m) ship within 1 week. Bulk production orders ship within 2 weeks, depending on customization.

Can you provide test reports or third-party certification documents before I place an order?

Yes. We provide CRI test reports, lumen maintenance (LM-80) data, and certification documentation (UL, CE, RoHS) for review before ordering. Independent third-party lab testing is available on request.

Do you offer private labeling or custom packaging for distributors?

Yes. OEM/ODM packaging, including custom reel labeling, box printing, and barcode/branding, is available for qualifying order volumes.

What payment terms and shipping methods do you support for international orders?

We accept T/T and L/C. Sea freight is used for bulk orders; air freight is used for samples or urgent shipments. Terms are confirmed with your sales contact based on order size and destination.

 

For project-specific specification sheets, sample requests, or bulk pricing on Dotless COB Strip Lights, contact our technical sales team.

 

Hot Tags: dotless cob strip lights, China dotless cob strip lights manufacturers, suppliers, factory

Send Inquiry
Send Inquiry