WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of long run strip lights in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium long run strip lights, welcome to get pricelist from our factory.
Key Specifications
|
Parameter |
Value |
|
LED Chip |
SMD2835 (120/240 LEDs per meter) |
|
Rated Voltage |
DC 12V / 24V |
|
Power Consumption |
9.6W–19.2W per meter |
|
IP Rating |
IP20 (indoor) / IP65 / IP67 (outdoor) |
|
CRI (Color Rendering Index) |
Ra ≥ 80 / Ra ≥ 90 (high-CRI option) |
|
Rated Lifespan |
50,000 hours |
|
MTBF |
≥ 30,000 hours* |
|
Certifications |
CE, RoHS, UL, ETL |
|
Warranty |
3 years standard |
Extended Operating Lifespan
Three design choices separate this strip from standard product when it's run 24/7:
Heavier copper, less heat
The PCB uses 2oz copper traces instead of the industry-standard 1oz. Lower resistance means less heat buildup during continuous operation - heat is the single biggest driver of early LED failure, so this is where the extra cost actually pays off.
A constant-current driver IC
Keeps current flow steady across the full run, which is what prevents the flicker and uneven dimming that shows up in cheaper strips after a few thousand hours.
Aluminum-backed PCB
Pulls heat away from the junction fast enough to keep operating temperature in a safe range even when the strip runs for weeks without being switched off.
Together, these hold MTBF at 30,000+ hours, with test documentation available alongside the CE/UL certificates included in every order.
Typical settings where this matters: 24/7 aisle and dock lighting in fulfillment centers, continuous-duty lighting in food processing and cold storage, and stairwells or parking structures that are lit around the clock.
Brightness and Color Stay Consistent Over Time
Light decay ≤3% after 6,000 hours of continuous burn-in testing, run to protocols aligned with IES LM-80 methodology.
Flicker-free across the full voltage range (10.8V–13.2V for 12V strips) - noticeable if you're shooting video or working full shifts under the lights, less noticeable if you're not, but built in either way.
Color consistency of SDCM ≤3 across the entire strip length, so a 20-meter run doesn't visibly shift in tone from one end to the other, which is a common complaint with lower-cost strips.
CRI ≥80 standard, ≥90 available, and that rating holds through the product's service life rather than only at first install.

Application Industries
Logistics & warehousing
Aisle and dock lighting that runs continuously benefits directly from the long rated life and low decay rate - fewer maintenance shutdowns, fewer replacement cycles.
Outdoor architectural & landscape lighting
Facade and landscape installs deal with rain, humidity, and seasonal temperature swings. The IP65/IP67 versions, sealed and thermally reinforced, are built for that exposure over years, not months.
Hospitality & commercial interiors
Hotel corridors, lobbies, and retail floors run lights every night without a break; guests and shoppers notice flicker or color drift faster than most other complaints. The high-CRI option is usually specified here to keep interior finishes looking accurate.
Exhibition & trade show displays
Booths often run 10–12 hours a day across multi-day events, and the strip needs to look the same on closing day as it did on opening morning.
FAQ
Does running this 24/7 shorten its life compared to intermittent use?
Less than you'd expect. The 2oz copper and aluminum backing were specifically sized for continuous load, not intermittent use - the thermal margin that protects the LEDs on day one is the same margin protecting them at hour 20,000.
How much does brightness actually drop over time?
≤3% after 6,000 hours in internal burn-in testing. For context, many standard strips show noticeably more decay in that same window, particularly past the 5-meter run length.
Can specs be customized?
Yes - length, 12V/24V, and IP20/65/67 are all configurable for OEM and bulk orders, along with color temperature (2700K–6500K) and high-CRI variants.
What's the single most important installation factor for longevity?
Heat dissipation. For indoor runs over 5 meters, mount on the supplied aluminum channel and make sure there's airflow around the strip if it's going inside an enclosed fixture - full guidelines ship with every order.
Where can I get the compliance documentation?
CE and UL test reports, along with our internal burn-in data, are available to procurement and QA teams on request - reach out to your account contact or the engineering team directly.
Hot Tags: long run strip lights, China long run strip lights manufacturers, suppliers, factory
