WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of rgb neon strip in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium rgb neon strip, welcome to get pricelist from our factory.
Lighting Effect: True Neon Glow, Full Color Control
Our RGB neon strip solves this with a thicker silicone extrusion and tighter LED pitch (60-96 LEDs/m depending on model), so there's no visible dot effect even at close viewing distance - a detail that matters most for signage and letter-shaped installations.
Key lighting features:
16 million colors with smooth RGB and RGBIC gradient transitions
Addressable pixel control (for chip-based versions) - run chasing, breathing, and rainbow-wave effects along a single strip
Adjustable brightness from 10% to 100% without flicker at low dimming levels
20+ built-in dynamic scene modes plus a static "true white" option for task lighting
App control (iOS/Android), 24-key IR remote, and Bluetooth music-sync modes included depending on SKU
*Note: Power supply and controllers are sold separately unless specified in your package.*
Compared to traditional glass neon tubing, this RGB neon light strip consumes approximately 60-70% less power for equivalent brightness output, and it does not require a heavy transformer box or professional glass-bending fabrication. Available in safe 12V / 24V low-voltage DC power supply.

Flexible Installation
The silicone housing bends to a minimum radius of approximately 25-30mm (model-dependent) without cracking, delamination, or light leakage at the bend point.
Installation options:
3M VHB adhesive backing for flat, clean surfaces (walls, ceilings, cabinets)
Aluminum/plastic mounting channel with clips for a more permanent, professional finish - recommended for signage and outdoor installs
Silicone mounting clips for cable-style routing around corners, furniture edges, or vehicle interiors
Cuttable at marked intervals (typically every 1-2 LEDs) with solderless connectors available, so a single RGB neon strip reel can be customized into multiple shorter runs for a single project
Extendable via connector cables for runs that need to cross gaps (doorways, window frames, multi-panel signage)
Most customers - including first-time installers - complete a standard indoor installation in under 15 minutes without any special tools. For outdoor or curved-letter signage work, we provide a wiring diagram and bend-radius chart with every bulk order to reduce installation errors on the customer's end.
Long-Term Performance
For distributors and project buyers, long-term reliability matters more than any single spec on a datasheet - so here's what we can back up with actual test data:
Rated lifespan
50,000 hours under normal operating conditions (theoretically around 17 years at 8 hours/day of use)
Waterproof rating
IP65 (splash and rain resistant, suitable for covered outdoor areas) and IP67 (short-term submersion rated for landscape and wet-location installs. Not designed for permanent underwater use.)
Operating temperature range
-20°C to 50°C, tested for both cold-climate outdoor signage and enclosed cabinet lighting where heat can build up
Color consistency
less than 3% color-point drift after 10,000 hours of continuous operation in our accelerated aging tests
- UV-resistant silicone outer layer slows yellowing when installed in sun-exposed outdoor locations.
Frequently Asked Questions
Is this RGB Neon Strip waterproof for outdoor use?
Yes. The IP65 version is rated for rain and splash exposure and is suitable for covered outdoor areas like patios and eaves. For direct ground burial, pool-adjacent, or fully exposed landscape installs, we recommend the IP67 version, which is fully sealed at both the strip body and end caps.
How do I cut and reconnect the RGB Neon Strip?
Cut only along the marked cutting lines (indicated by a scissor icon and copper pad). After cutting, use the included solderless connectors to rejoin sections or attach a power lead - no soldering iron required for most residential installs, though soldering is recommended for outdoor or high-vibration commercial applications for a more permanent seal.
What's the difference between RGB neon strip and regular LED strip light?
A standard LED strip shows individual points of light through a clear or frosted cover. An RGB neon strip uses a thicker silicone diffuser that blends the LEDs into one continuous glowing line, closely mimicking traditional glass neon - which is why it's preferred for signage, lettering, and any exposed-light-source application.
Can I control the color with a phone app?
Yes, chip-based (addressable) versions support full app control via Bluetooth or Wi-Fi, including color selection, brightness, scene modes, and music-sync effects. Non-addressable versions are controlled via the included IR remote or a compatible RGB controller.
For bulk pricing, OEM/ODM customization, or compliance documentation (CE/RoHS/UL test reports), please contact our sales team directly.
Hot Tags: rgb neon strip, China rgb neon strip manufacturers, suppliers, factory
