WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of smd 7 segment display in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium smd 7 segment display, welcome to get pricelist from our factory.
Ultra-Compact, Reflow-Ready Package
A slim profile is one of the main reasons designers switch from DIP to SMD 7-segment displays. Typical package thickness ranges from 2.1 mm to 3.75 mm, noticeably slimmer than through-hole equivalents.
Available digit heights include:
0.20" (5 mm)
0.28" (7.1 mm)
0.30" (7.62 mm)
0.39" (10 mm)
0.56" (14.22 mm)
Structural advantages:
Fully compatible with automated SMT reflow soldering lines
No through-holes, which frees up PCB routing space and supports denser layouts
Thin body suited to wearable devices, handheld meters, and space-constrained panels
Gray face with a white diffused segment finish for even contrast under ambient light

How It Compares to LCD and OLED
An SMD 7-segment LED display is self-emitting and doesn't rely on backlighting. This keeps it readable in direct sunlight, a common weak point for LCD modules, which tend to wash out outdoors. It also offers a wide viewing angle and lower power draw than a backlit LCD at a given brightness level. LCDs remain the better option for ultra-low-power idle states, but for outdoor or industrial readouts where visibility matters most, SMD LED displays are the more practical choice.
Customization Capability
We've been manufacturing LED displays and components since 2006. Our production line - die bonders, wire bonders, LED separators, taping machines, environmental test chambers, and optical inspection equipment - supports full customization at bulk-order volumes, not just one-off samples.
Color & wavelength matching. Standard emitting colors are red, bright green, blue, yellow, orange, and white. Colored segments are matched to a target dominant wavelength (nm); white segments are matched to a target color temperature (K). Send your target spec for bulk-order custom matching.
Polarity - common cathode / common anode. Both are available on any digit height or color. In a common-cathode display, segment cathodes are tied together and segments light with a high-level (logic 1) drive signal. In a common-anode display, segment anodes are tied together and segments light with a low-level (logic 0) drive signal. Polarity choice should match your driver IC - most modern LED driver ICs specify a preferred polarity in their datasheet.
Consistency across an order. Every segment is binned for forward voltage and luminous intensity before assembly. Every batch is tested in-house for luminous intensity, forward voltage, and environmental reliability prior to shipment. Retained bin data lets us match brightness and color digit-to-digit, unit-to-unit, and batch-to-batch on repeat orders. Expected operating life is 50,000–100,000 hours under normal drive conditions.
Compliance. All products are RoHS and REACH compliant. Certification documentation is available on request for bulk-order shipments.

Technical Parameters
|
Parameter |
Specification |
|
Digit Height |
0.20" / 0.28" / 0.30" / 0.39" / 0.56" |
|
Package Type |
SMD (surface mount) |
|
Polarity |
Common cathode / common anode |
|
Emitting Colors |
Red, green, blue, yellow, white, orange |
|
Forward Voltage (Vf) |
1.8–2.6 V (red/yellow); 2.0–3.5 V (green/blue/white) per segment |
|
Forward Current (If) |
10–20 mA typical; up to 100 mA peak at 1/10 duty |
|
Luminous Intensity |
10–100+ mcd per segment (varies by color and size) |
|
Viewing Angle |
120°–160° |
|
Operating Temperature |
-25°C to +80°C |
|
Soldering Method |
Reflow soldering, 260°C max |
|
Certifications |
RoHS, REACH |
Exact values vary by model and color - please refer to the specific datasheet for your part number.



FAQ
1. What's the practical difference between your 0.28" and 0.30" digit heights for a panel-meter application?
The 0.28" (7.1 mm) digit fits compact handheld meters better, where board space is tight. The 0.30" (7.62 mm) digit works well for wall-mounted or bench instruments viewed from a meter or more away. Not sure which fits your enclosure? Send us your viewing distance and cutout dimensions.
2. Can I mix common-cathode and common-anode digits on the same board?
Not on the same driver IC - the drive logic (sourcing vs. sinking current) is opposite between the two, so all digits on one driver need matching polarity. Designs using multiple driver ICs can mix polarities across different digit groups. Send us your driver IC part number and we'll confirm compatibility.
3. How do you handle color consistency across a large repeat order placed months apart?
Each production run is binned against the same reference standard used in prior runs, and we hold your original batch's binning data on file. Mention your original PO number when reordering so we can match to the same bin.
4. What's the lead time difference between standard and custom colors?
Standard configurations ship faster since they run on existing production setups. Custom wavelength or color-temperature matching needs binning time plus first-article sample approval before mass production begins. Send your target spec and order quantity and we'll give you an exact timeline.
5. Can I get samples before committing to a bulk order?
Yes. Sample quantities are available for design validation. If you're trying a new color, size, or polarity configuration for the first time, this is the recommended path.
Tell us your digit height, color, polarity, and order quantity - we'll get back to you with a datasheet, pricing, and lead time within one business day.
Hot Tags: smd 7 segment display, China smd 7 segment display manufacturers, suppliers, factory
