WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of 4 digit 7 segment display and with clock display in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium 4 digit 7 segment display and with clock display, welcome to get pricelist from our factory.
Specifications
|
Parameter |
Specification |
|
Product Type |
4-Digit 7-Segment Display Module (with colon) |
|
Digit Size |
0.28" / 0.36" / 0.39" / 0.56" / 0.8" / 1.0" / 1.2" (custom sizes available) |
|
Driving Method |
Common Anode / Common Cathode |
|
Display Color |
Red, Green, Blue, Yellow, White, Bi-color options |
|
Pin Count |
12-pin standard |
|
Forward Voltage (Vf) |
1.8–2.2V (Red/Yellow/Green), 3.0–3.4V (Blue/White) |
|
Forward Current (If) |
10–20mA per segment (recommended) |
|
Viewing Angle |
100°–120° |
|
Package Process |
THT through-hole, epoxy resin encapsulation |
|
Operating Temperature |
-40°C to +80°C |
|
Certifications |
RoHS, CE, REACH |
|
Packaging |
Anti-static trays + vacuum bags, suited for both air and sea freight |
Each production run is QC-tested for brightness, forward voltage, and segment uniformity. SGS and RoHS test reports are available on request before you confirm an order.
How the Clock Display Module Works
Multiplexed scanning.
All four digits share the same a–g segment pins, and digit-select lines cycle at over 60Hz. Because the refresh rate is well above what the eye can track, all four digits look continuously lit - the same persistence-of-vision principle used in most multi-digit LED displays, with no visible flicker at normal viewing distance.
Driver IC options.
74HC595 - a basic, low-cost shift register, well suited to simple DIY builds.
TM1637 - a dedicated clock driver with built-in key scanning and two-wire communication. It's the go-to choice for most electronic clock and digital clock module projects.
MAX7219 - used when you need higher brightness uniformity or plan to expand across multiple digits.
Colon control.
The center colon is wired independently and is usually driven to blink at 1Hz to mark seconds.
Timekeeping accuracy.
The display itself doesn't keep time. That job falls to an external crystal oscillator or RTC chip, such as the DS1302 or DS3231. What the display module actually controls is response speed and voltage-drop consistency - the two things that determine how stable and even the digits look in operation.
Display Performance
Uniformity - each batch is binned for brightness and color match, so all four digits stay visually consistent across a run.
Housing options - black-face housing gives strong contrast for indoor use; white-diffused or gray-face housings widen the viewing angle for outdoor or bright-light conditions.
Lifespan - rated 50,000–100,000 hours under normal drive current, with the gradual brightness attenuation typical of always-on clock displays.
Dynamic vs. static drive - dynamic scanning costs less and draws less power at equivalent brightness, and it's what most consumer clock designs use. Static drive is also available for industrial instruments that need maximum brightness and stability.
Reference brightness (0.56" red, common cathode, If = 20mA): approx. 8–12mcd per segment. Exact figures vary by color and bin - tell us your target color and end application and we'll confirm the spec for your configuration.

Common Applications
DIY Arduino/ESP32 clock and timer builds
Smart home devices - alarm clocks, weather stations, LED clock display modules
Industrial control panel timers and countdown displays
Retail/kitchen timers and score-counter displays
FAQ
Common anode or common cathode - which one do I need?
It depends on your driver IC. TM1637-based modules are typically common cathode, while 74HC595 designs more often run common anode - though this can vary by board layout. Send your schematic and we'll confirm the right version for your build.
Can I customize color, size, or pin layout?
Digit size, color, anode/cathode type, and colon position are all configurable. Sample lead time runs 3–7 days, and MOQ for customized units typically falls between 500–1,000 pcs depending on how extensive the customization is.
Does it work with Arduino or Raspberry Pi?
It does. TM1637 libraries are widely available for Arduino, ESP32, and similar boards, so most integrations just come down to wiring CLK/DIO and importing an existing library.
How is it packaged and shipped?
Units are packed in anti-static trays and vacuum bags, then boxed into moisture- and shock-resistant cartons. Air, sea, and express (DHL/FedEx) shipping are all available depending on order size, with full customs documentation included.
Can I test a small batch before ordering in bulk?
Yes - paid samples are available, and the sample cost is credited toward your order if you move forward with a bulk purchase.
Not sure which driving method or digit size fits your design?
Send over your schematic or describe your intended use case, and we'll recommend a configuration - or we can send samples for you to test on your own hardware first.
Hot Tags: 4 digit 7 segment display and with clock display, China 4 digit 7 segment display and with clock display manufacturers, suppliers, factory
