3 Digit 7 Segment Display

3 Digit 7 Segment Display
Details:
A compact LED numeric readout for applications that need a clear 000–999 count without the size or wiring overhead of a 4-digit unit. Sizes range from 0.28" to 2.3", covering everything from handheld instruments to panel-mount gauges.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of 3 digit 7 segment display in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium 3 digit 7 segment display, welcome to get pricelist from our factory.

 

Electrical Specifications

 

 

Each module is characterized under the conditions below. Unless otherwise noted, values are typical/reference figures measured at 25°C ambient. 

Parameter

Typical Value

Test Condition

Forward Voltage (Vf)

1.8–2.2V (red/yellow/green); 2.8–3.6V (blue/white)

At If = 20mA, Ta = 25°C

Forward Current (If)

5–20mA per segment recommended; up to 30mA peak in multiplexed drive

Multiplexed duty cycle ≤ 1/8

Operating Temperature

-25°C to +80°C

Storage: -30°C to +85°C

Viewing Angle

100°–120°

2θ½, per segment

Power Consumption (static drive)

Approx. 15–20mW per digit

At recommended If, continuous drive

Power Consumption (multiplexed)

Approx. 30–40% of static-drive figure

At 1/8 duty cycle, typical scanning frequency

Power figures above are reference estimates for design planning; request full characterization data for production sign-off.
Automotive-grade versions with extended temperature range (-40°C to +105°C) are available on request.

 

Driver Options

 

Driver

Best For

Direct GPIO + resistors

Simple, low-cost designs with one or two digits

74HC595 shift register

Cascading multiple digits while saving MCU pins

MAX7219 / MAX7221

Multi-digit setups needing brightness control and simplified wiring

TM1637 / TM1638

Serial-interface designs common in hobbyist and mid-range consumer products

Every batch is bench-tested with Arduino, STM32, and ESP32 reference circuits, covering both GPIO-direct and driver-IC (MAX7219/TM1637) wiring, before shipment.

 

Quality Control

 

Burn-in test

Every batch runs a minimum 48-hour burn-in at rated current before packing, to screen out early-failure units.

Bin-sorting

Units are sorted by forward voltage, luminous intensity, and wavelength to keep batch-to-batch variation within a tight tolerance.

ESD-safe handling

Throughout assembly, compatible with SMT line integration.

Outgoing defect rate

Target below 0.5%, verified by random sampling for lit-segment and dead-segment defects.

 

Where It's Used

 

Consumer electronics - kitchen timers, digital scales, blood pressure monitors, countdown timers. A 0.36" or smaller Common Cathode unit is usually the easiest fit here, since most low-pin-count MCUs in this category (e.g., ATtiny, entry-level STM8) default to active-high GPIO output.

 

Industrial instrumentation - temperature controllers, current/voltage meters, production counters, process monitors. Multiplexed MAX7219 drive is the common choice for multi-digit panels, since it cuts wiring and MCU pin count on larger assemblies.

 

Automotive & vehicle electronics - odometers, battery voltage indicators, auxiliary gauges. Automotive-grade variants with extended temperature range are recommended for under-dash or engine-bay mounting.

 

Maker & education projects - Arduino, Raspberry Pi, and STEM kits. Sample code and wiring diagrams are available on request for TM1637 and MAX7219 setups.

product-800-800

 

FAQ

 
 

Common Anode or Common Cathode - which do I need?

It depends on whether your driving IC or MCU logic is active-low or active-high. Send us your MCU or driver part number and we'll confirm the right configuration.

Does this work with Arduino or Raspberry Pi out of the box?

Yes, particularly when driven through a MAX7219 or TM1637 - both are supported by mature, widely-used libraries. Sample code and wiring diagrams are available on request.

What certifications do your displays carry?

RoHS and REACH compliant as standard. Additional certifications can be arranged depending on your target market.

What's the MOQ and sample lead time?

Standard catalog items: MOQ is 1,000 pcs; samples ship within 3–5 business days. Custom configurations (non-standard size, color, or pinout) typically require 5,000–10,000 pcs per specification, with engineering samples taking 2–3 weeks depending on complexity.

Can I get a non-standard size, color, or pinout?

Yes, for qualifying order volumes. Datasheets and mechanical drawings are provided in PDF format for PCB design.

What's your defect rate?

Outgoing defect rate is targeted below 0.5%, verified through the burn-in and bin-sorting process described above.

 

Hot Tags: 3 digit 7 segment display, China 3 digit 7 segment display manufacturers, suppliers, factory

Send Inquiry
Send Inquiry