WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of dual digit 7 segment display in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium dual digit 7 segment display, welcome to get pricelist from our factory.
Key Advantages
Smaller footprint. Two digits share one DIP package, freeing up board space without affecting brightness or viewing angle. This matters most in handheld meters and multi-digit counters, where panel space is limited.
Fewer solder joints. The standard 10-pin DIP layout drops into existing schematics with no rework. Compared to wiring two separate single-digit modules, this cuts the number of solder points roughly in half.
Flexible Drive Options. Runs directly off a microcontroller GPIO. It also works with common driver ICs for multiplexed multi-digit setups.
Built for demanding environments. Rated for lead-free reflow soldering up to 260°C. Full temperature range is listed in the specifications table below.

Technical Specifications
|
Parameter |
Specification |
|
Display type |
Dual digit 7-segment LED display |
|
Digit height |
0.28" / 0.36" / 0.56" / 0.8" / 1.0" (standard); custom up to 3.0" available |
|
LED color |
Red / Green / Yellow / Blue / White / Orange |
|
Configuration |
Common anode / Common cathode |
|
Forward voltage (Vf) |
1.8V–2.2V (Red/Yellow/Orange); 3.0V–3.4V (Blue/White/Green) |
|
Forward current (If) |
10mA–20mA per segment (typical) |
|
Peak forward current |
100mA pulsed at 1/10 duty cycle. For multiplexed multi-digit configurations, stay within this rating, or request the full datasheet for extended duty-cycle and peak-current guidance. |
|
Operating temperature |
−40°C to +85°C |
|
Storage temperature |
−40°C to +100°C |
|
Luminous intensity |
2–20 mcd typical; high-brightness variants available |
|
Wavelength (Red) |
625–630 nm |
|
Viewing angle |
120° typical |
|
Pin count |
10 pins (standard DIP package) |
|
RoHS compliance |
Yes |
|
Lead-free soldering |
Yes, up to 260°C reflow |
Customization Capabilities
Beyond the standard catalog, our engineering team develops custom dual-digit LED displays for specific digit heights, tightly controlled wavelengths, or non-standard pin spacing. Past projects include instrument panels for automotive dashboards and handheld diagnostic meters for medical devices. We've also supplied high-brightness units for outdoor signage.
Appearance
Custom LED colors and tightly controlled wavelengths, including 590 nm amber commonly specified for automotive and industrial panels
Custom panel face colors, decimal points, and colon separators for clock and timer displays
Segment width ratios adjusted to match specific industrial or consumer visual standards
Electrical
Drive voltage optimized for 3.3V systems
High-brightness variants for outdoor or direct-sunlight readability
Ultra-low power configurations for battery-operated instruments
Package
DIP, SMD, or non-standard pin spacing
Custom connector types
PCB mounting holes per customer drawing
Quality and Supply Assurance
|
Category |
Details |
|
Production quality control |
LED chips sourced from established suppliers in Taiwan and Japan. Every unit passes automated optical inspection for voltage, brightness, color, and segment integrity, with 72-hour burn-in sampling on each production lot. |
|
Certifications |
ISO 9001:2015; RoHS 2.0 / REACH compliant; UL support available on request |
|
Issue resolution |
Initial response within 48 hours of any reported issue, followed by a root-cause corrective action (RCCA) report within 5 business days |
|
Stock |
Common part numbers are backed by 1–2 months of safety stock for emergency replenishment |
|
Packaging |
ESD-safe, moisture-proof packaging suitable for ocean freight |
Frequently Asked Questions
What is a dual digit 7-segment display?
A package that integrates two independently driven 7-segment digits, each with segments a through g plus a decimal point. It can display numerals 0–9 and a limited set of characters, and is common in counters, timers, digital meters, and control panels.
Common anode or common cathode: what's the difference?
In a common anode display, all anodes connect to VCC and segments light up when driven LOW. In a common cathode display, all cathodes connect to GND and segments light up when driven HIGH. Both configurations ship from stock. Specify your preference when ordering.
Can this display be driven directly from a microcontroller?
Yes. A standard current-limiting resistor, 330Ω is typical at 5V, is enough for direct GPIO drive. For multiplexed or multi-digit setups, a driver IC such as the MAX7219 or TM1637 reduces pin count and simplifies firmware.
What digit heights do you offer?
Standard heights are 0.28", 0.36", 0.56", 0.8", and 1.0". Custom heights up to 3.0" are available. Engineering samples for custom heights typically take 2–3 weeks.
Can I get samples before placing a production order?
Yes. Standard samples ship within 3–5 business days. Custom engineering samples typically take 2–3 weeks, depending on the specification.
What's the minimum order quantity?
1,000 pieces for standard catalog items. Most custom configurations require 5,000–10,000 pieces per specification.
What engineering files can you provide?
PDF datasheets, STEP 3D models, KiCad and Altium footprint libraries, and application notes. PSpice simulation files are available for select configurations.
Have a project in mind?
Send us your digit height, color, configuration, and target volume, and we'll get back within one business day with a matched part recommendation, datasheet, and sample lead time.
Hot Tags: dual digit 7 segment display, China dual digit 7 segment display manufacturers, suppliers, factory
