DIP Through-hole LED

DIP Through-hole LED
Details:
This DIP through-hole LED is a T1¾ package indicator diode with two rigid leads that pass through a drilled PCB hole and solder on the reverse side. Because it's mechanically anchored through the board itself, it holds up well to vibration, panel-mount rework, and legacy through-hole designs where SMD components aren't a practical option.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of dip through-hole led in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium dip through-hole led, welcome to get pricelist from our factory.

 

Advantages & Features

 

Viewing angle. At a 30° viewing angle, this 5mm indicator LED concentrates its light output for clear visibility from a normal front-facing position - well suited to dashboard and control-panel mounting. Need a wider viewing range? The same T1¾ LED body is also available in 60°, 120°, or 180° on request.

 

Brightness. This DIP LED delivers 4,400–16,000mcd of luminous intensity at 20mA drive current - bright enough to stay visible under direct sunlight or strong ambient lighting, which makes it a good fit for outdoor equipment status indicators as well as indoor panels.

 

Color temperature. With a correlated color temperature of 6,000K–7,000K, this cold white through-hole LED gives off a clean, slightly blue-leaning white that reads clearly against both light and dark enclosures. Red, yellow, green, blue, warm white, and bi-color versions of the same 5mm LED package are also available.

 

Batch consistency. Every lot of this through-hole LED is 100% tested and binned for color coordinate and brightness before packing, so panels using multiple units side by side won't show visible mismatch. Customers who need it for their own quality files can request 48–72 hour burn-in aging reports.

product-800-800

 

Application Scenarios

 

Ideal for industrial control panels, instrument dashboards, household appliance indicators, power-supply status lights, outdoor equipment, DIY kits and legacy through-hole projects. Suitable for vibration-prone applications requiring high mechanical reliability.

DIP LED Apperance checking-3

 

Technical Specifications

 

Parameter

Value

Package Size

Ø5mm round-head, T1¾ package (lens Ø5.0mm, flange Ø5.8mm)

Die Material

InGaN

Emission Color

Cold White

Lens Color

Water Clear

Viewing Angle (2θ1/2)

30°

Forward Voltage (Vf) @ IF=20mA

2.8V – 3.4V (±0.1V)

Rated Forward Current (IF)

30mA max

Peak Forward Current (IFP)

100mA

Reverse Voltage (VR)

5V

Luminous Intensity (Iv) @ IF=20mA

4,400 – 16,000mcd (±10%)

Correlated Color Temperature (CCT)

6,000K – 7,000K

Reverse Current (IR) @ VR=5V

≤10μA

Power Dissipation (Pd)

102mW

Lead Pitch

2.54mm

Lead Length

28mm min.

ESD Rating

1,000V

Operating Temperature

-30°C to +85°C

Storage Temperature

-40°C to +100°C

Compliance

RoHS

Specifications are taken from datasheet Rev. A0. Full IV curves, spectral distribution, and chromaticity bin data are available on request.

 

Customization Options

 

The specification above is our standard stocked configuration. The same 5mm T1¾ through-hole LED body can also be produced to these custom specs:

 

  • Color: red, orange, yellow, green, blue, warm white, bi-color, or RGB tri-color - each tested to its own dominant wavelength range (standard red runs approximately 620–625nm)
  • Viewing angle: 15°, 60°, 120°, or 180° in place of the standard 30°
  • Brightness bin: narrower mcd binning for panels that need tighter unit-to-unit matching than standard production tolerance
  • Lead form & packaging: straight, bent, or trimmed leads; custom reel/tape spec; private-label packaging with your logo

 

MOQ for custom color/spec combinations starts at 1,000 pcs per variant - see the FAQ below for trial-order details.

DIP LED Molding Process-1

 

FAQ

 

 

What's the MOQ, and can you do a smaller trial order first?

Standard MOQ is 1,000 pcs per color/spec. First-time buyers can typically start with a smaller trial order to verify quality and fit before committing to full production - tell us your target quantity and we'll confirm what works.

Do you provide samples, and how long does that take?

Yes, for both the standard cold white spec and custom colors/angles. Sample lead time is 3–5 working days plus shipping.

Is this LED RoHS/REACH compliant? Can you provide test reports?

All standard products are RoHS, REACH, and CE compliant. We can supply third-party SGS/TUV test reports for import documentation, or support independent testing on your side if your customer requires it.

What's the standard production lead time, and what payment terms do you accept?

Bulk orders typically ship in 7–15 days depending on quantity and customization. We accept T/T and L/C; other terms can be discussed depending on order size.

Can you match our production line's lead form or packaging requirements?

Yes. Send us your line's lead length, bend angle, reel width, and tape pitch, and we'll confirm whether we can match it directly or need to adjust the format.

Looking for a long-term supplier for repeat orders?

We supply a number of OEM/ODM partners on an ongoing basis. Send your target spec and volume and we'll quote within 24 hours.

 

Hot Tags: dip through-hole led, China dip through-hole led manufacturers, suppliers, factory

Send Inquiry
Send Inquiry