Round Through-hole LED

Round Through-hole LED
Details:
Built on the industry-standard T1-3/4 (5mm) package, this LED series is a go-to light source for indicator lights, backlighting modules, instrument panels, home appliance control boards, and toy lighting effects.
Send Inquiry
Description
Send Inquiry

WCN OPTO Group Co., Limited is one of the most reliable manufacturers and suppliers of round through-hole led in China. With abundant experience, we are committed to providing high quality customized products with competitive price. If you're going to wholesale bulk premium round through-hole led, welcome to get pricelist from our factory.

 

Key Selling Points

 

Consistent Performance, Batch After Batch We work with a small number of vetted wafer suppliers and keep chip batches segregated during production. This keeps color temperature and brightness variance within a single order tighter than what most comparable products on the market can offer.

 

Efficient Heat Dissipation The lead frame uses thickened, tin-plated copper wire to shorten the thermal path, and an optimized chip-mounting process further reduces junction temperature. Together, these design choices help prevent the light decay and premature failure that poor heat management typically causes.

 

Rated for 50,000+ Hours Under standard operating current, the LED is rated for over 50,000 hours of service, making it well suited to maintenance-free, long-cycle applications such as industrial indicator lights, outdoor signage, and equipment status displays.

 

Low Light Decay Selected chips are paired with an optimized encapsulant formula for stronger resistance to UV aging and yellowing. In 1,000-hour continuous lighting tests, luminous flux maintenance stays above 95%.

 

Pre-Screened for Reliability Every unit goes through thermal shock, humidity, and mechanical stress testing before it ships - see full results in the specification table below.

product-800-800

 

Important Application Tips

 

1. Avoid bending leads close to epoxy lens root, mechanical stress may cause internal wire breakage.


2. Add current-limiting resistors when multiple LEDs are connected in parallel to prevent uneven brightness or burnout.


3. Do not overheat the lens during soldering to avoid epoxy yellowing and deformation.

DIP LED Taping machine-1

 

Technical Specifications

 

Item

Specification

Part No.

WCN-501CW1-30-65-T

Product Type

Round Through-hole LED (DIP LED / T1-3/4 Package)

Chip Material

InGaN

Emitted Color

Cold White

Lens Color

Water Clear

Dimensions

Ø5mm lens / Ø5.8mm flange, body height 8.7mm, overall length ≥28mm, lead pitch 2.54mm

Lead Type

Standard straight leads (bent/long-lead customization available; compatible with 5mm tape & reel)

Viewing Angle (2θ1/2)

30° (IF=20mA)

Luminous Intensity (Iv)

4,400–16,000 mcd (IF=20mA, 4 brightness bins)

Correlated Color Temp. (CCT)

6000–7000K (IF=20mA)

Forward Voltage (Vf)

2.8–3.4V (IF=20mA, 3 voltage bins)

Max. Forward Current (IF)

30mA

Peak Forward Current (IFP)

100mA

Power Dissipation (Pd)

102mW

Reverse Voltage (VR)

5V (IR ≤ 10μA @ VR=5V)

Operating Temperature (Topr)

-30°C to +85°C

Storage Temperature (Tstg)

-40°C to +100°C

ESD Protection

HBM ≥ 1000V

Packaging

5mm tape & reel; 2,000 pcs/inner carton, 20,000 pcs (10 inner cartons)/outer carton

Certifications

RoHS; third-party test reports (SGS/CTI) available on request

 

Reliability Test Results (0/22 failures across all tests):

  • 100 cycles of temperature cycling / thermal shock
  • 10 cycles of high-humidity heat exposure
  • 1,000 hours of high/low-temperature storage
  • 1,000 hours of continuous life testing
DIP LED Testing and binning machine-2

 

Customization Options

 

Requirements for this product tend to differ a lot from one market or application to the next, so we offer the following customization options:

 
 

Size

1. 3mm, 5mm, 8mm, 10mm, and special-shaped round heads

 
 

Lead length/shape

Standard, extended, bent, or snap-fit leads to match different PCB assembly processes

 
 

Color and color temperature

Sorted to match preferred ranges for target markets such as Europe/US, Southeast Asia, and the Middle East

 
 

Brightness binning

Tighter chromaticity and brightness tolerance for specific assembly requirements

 
 

Viewing angle

From narrow-beam spot lighting to wide-angle flood lighting, for indicator, backlight, or decorative use

 
 

Lens clarity

Water clear, milky white, full diffused, or semi-diffused

 
 

Packaging and marking

Customer branding/printing, custom reel/tape packaging, and tape orientation compatible with your production line

 
 

Pre-production sampling

Small-batch samples available for validation before a bulk order, to reduce new-product introduction risk

Let us know your application - appliance indicators, instrument panels, outdoor signal lights, or something else - along with your target current, brightness, color temperature, or mounting dimensions. We'll match the right spec from current production, or arrange a sample for evaluation.

 

FAQ

 

 

Q: What is your production lead-time?

A: Standard items: 7-10 working days. Custom orders take 10-15 working days based on requirements.

Q: Can lead shape and dimension be customized?

A: Yes. Bent, extended and snap-fit leads are available to match your PCB assembly process.

 

Hot Tags: round through-hole led, China round through-hole led manufacturers, suppliers, factory

Send Inquiry
Send Inquiry